Short Pens Convenient Carry Vintage Calligraphy Pen Set Hongdian M2

Zhejiang Lishui Lantian Pens Co., Ltd. is one of the leading manufacturers and suppliers of short pens convenient carry vintage calligraphy pen set hongdian m2 in China. If you're going to buy bulk CE approved short pens convenient carry vintage calligraphy pen set hongdian m2, welcome to get pricelist from our factory. All customized products are with high quality and competitive price.

M2 is aimed at writers who want a pocket-sized metal pen without giving up a substantial hold. The cap attaches to the rear for use, and the internal space supports confirmed 3.4 mm cartridges or Hongdian's dedicated short converter. Nib grade, color mix, cartridge count, converter supply and retail presentation should be settled in the signed order.

M2 Black Forest Mini combines a short anodized body, black clip and understated forest-inspired finish.

The measurements and material notes below follow the supplied M2 panels. Hand measurement is approximate, and anodized Forest, Stream, Night Glow and Soil finishes may shift under different light. Final inspection should use the approved physical color and writing samples.

The M2 specification image presents the compact body in olive and gray-purple anodized finishes.

Forest, Stream, Night Glow and Soil finishes form the supplied M2 color range.

Muted Forest Colors with Black Technical Details

 

M2 uses nature references without becoming bright or decorative. Forest is olive, Stream moves toward deep blue, Night Glow is a cool gray-purple and Soil is brown. Black clips, bands and nibs create one consistent frame across the four bodies, allowing mixed-color displays to look deliberate.

• A straight short cylinder slips easily into a compact case, pouch or notebook loop.
• The softened cap-to-barrel transition keeps the posted hold from feeling visually abrupt.
• Approve anodized tone and texture on metal samples rather than from screen color alone.
• The compact form suits journaling, note-taking, travel writing and thoughtful stationery gifting.

M2 separates into a cap with spring clip, compact barrel, front section, black nib, No. 26 feed and short filling component. The cap protects the point during carry and posts over the rear to create full writing length. Inside the barrel, limited clearance makes correct cartridge and converter selection especially important.

The M2 structure can be inspected as a set of connected functional parts. The cap carries the mechanical spring clip and protects the nib. The rear barrel accepts the cap for posted writing. Inside, the section supports the soft black nib and No. 26 feed, while either a compatible cartridge or the dedicated short converter supplies ink.

The disassembled M2 view shows cap, nib section, short converter and rear barrel as separate parts.

CNC Aluminum Anodized Color and Mechanical Clip

The aluminum-alloy body is shaped by CNC and colored by anodizing, not by a surface paint film. This reduces concern about peeling but does not make the metal immune to impact or abrasion. Quality review should cover machining around the ends, consistent matte texture, black hardware, thread feel and the spring clip's return.

• Check every body for dents, machining lines, sharp edges and inconsistent anodized tone.
• Inspect the cap, threads and section transition for smooth engagement and correct alignment.
• Test clip spring, opening clearance, attachment and return without twisting the cap hardware.
• Confirm that black trim and nib finish are even and free from obvious scratches or discoloration.
• Use protective retail inserts so the anodized body and black clip cannot rub during shipment.

DIMENSIONS AND WRITING PERFORMANCE

 

Pocket Length with a Full Posted Reach
M2 closes to about 105 mm, making it clearly shorter than a conventional fountain pen. With the cap posted, it reaches approximately 137 mm, close to the 138 mm ordinary-pen comparison. A grip around 10 mm through the middle and 25 mm in useful length helps the extended pen settle into a normal writing position.

Soft Black Nib and Number 26 Feed
The black nib is described as soft and controllable, with a fine knife-edge, non-spherical treatment intended to respond to directional strokes. This is not a promise of broad flex. Line character still changes with grade, ink, paper, angle and hand pressure, so retain a signed writing sample for the selected configuration.

Posting the cap extends M2 to approximately 137 mm for a longer, balanced writing position.

Cartridge Setup Converter Filling and Routine Care

Install only the 3.4 mm cartridge or dedicated short converter confirmed for M2. Ink can mark fabric and unfinished surfaces, so fill over a protected area. If the barrel, section or filling component resists assembly, remove it and check alignment instead of tightening harder.

USING A 3.4 MM CARTRIDGE

• Unscrew the barrel and push the compatible cartridge straight onto the rear of the section until its seal opens.
• Reassemble the barrel, hold the nib downward briefly and allow ink to reach the feed naturally.
• If the first line is dry, touch the nib lightly to clean paper; do not squeeze or shake the pen.

USING THE SHORT ROTARY CONVERTER

• Fit the dedicated short converter firmly to the section and rotate the piston fully downward.
• Immerse the nib and feed in fountain-pen ink, then rotate slowly to draw ink into the chamber.
• Remove the nib, wipe excess ink, expel trapped air if needed and confirm clearance before closing the barrel.

CLEANING AND STORAGE

• Flush the nib and feed with clean, cool water when changing ink colors or before long storage.
• Keep the pen capped between sessions; store it clean and dry when it will not be used for an extended period.

The dedicated short converter is shown filling the compact M2 through the nib and feed.

M2 is shown in active writing use with the cap posted and the section held near its curved transition.

Pen Cartridges Converter and Retail Packing

 

The pictured configuration identifies one M2 fountain pen and one box of compatible 3.4 mm cartridges. A short rotary converter is demonstrated as another filling route, but its inclusion is not automatic. A vintage calligraphy pen set listing should name the pen finish, nib, cartridges, converter, insert and case separately.

REFERENCE	SUPPLIED PRODUCT INFORMATION
Pen selection	Confirm Forest, Stream, Night Glow or Soil finish and the approved nib grade.
Cartridges	Confirm 3.4 mm specification, ink color, quantity, shelf information and retail box.
Converter	State clearly whether the dedicated short rotary converter is included or optional.
Presentation case	If offered, approve case material, dimensions, insert, logo and closure separately.
Instructions	Match filling, cleaning, safety and storage guidance to the final configuration.
Retail labeling	Confirm model, color, nib grade, barcode, language and country requirements.
Shipment protection	Prevent contact between metal surfaces, clip, nib and loose accessories.

The subdued colors and black nib support a heritage mood, yet packaging claims must match the actual order. Do not present a converter, gift case or additional accessory as standard unless the approved packing list includes it.

Production and Quality Control

 

Lishui Lantian Pen Co., Ltd. has manufactured HONGDIAN writing instruments since 1997. M2 production involves aluminum preparation, CNC machining, anodizing, assembly, nib and feed testing and packing. The retained control pen should define color, surface texture, cap closure and posting, spring clip action, writing result and short filling parts.

Packing control: reconcile every pen, cartridge, converter, instruction insert and case with the order.Manufacturer-supplied views: metal stock, component handling, production staging and workshop assembly.

view more

 

Material control: verify aluminum-alloy construction and the approved internal component list.

 

Finish control: compare color, texture, black hardware, machining and surface protection.

 

Assembly control: inspect cap closure, posting fit, mechanical clip, section and converter clearance.

 

Writing control: record start-up, flow, line consistency and approved nib sample before packing.

Before ordering the vintage calligraphy pen set, approve the M2 finish, nib behavior, 3.4 mm cartridge supply, converter status and exact packaging. Production should follow the quotation, signed sample and confirmed protection requirements.

Hot Tags: short pens convenient carry vintage calligraphy pen set hongdian m2, China short pens convenient carry vintage calligraphy pen set hongdian m2 manufacturers, suppliers, factory, cartridge pen set, fine point pen set, signature pen set, vintage calligraphy pen set