Short Pens Convenient Carry Pen And Case Gift Set Hongdian M1

Zhejiang Lishui Lantian Pens Co., Ltd. is one of the leading manufacturers and suppliers of short pens convenient carry pen and case gift set hongdian m1 in China. If you're going to buy bulk CE approved short pens convenient carry pen and case gift set hongdian m1, welcome to get pricelist from our factory. All customized products are with high quality and competitive price.

M1 is designed to travel closed and write with its cap posted. The front uses Hongdian's No. 26 nib and an improved feed, while the short barrel requires the compatible compact cartridge or dedicated converter shown in the source material. Color, nib, filling supply, engraving and case arrangement should be fixed in the order rather than assumed from the photographs.

The M1 Submarine uses a rounded short-body form intended for pocket carry and posted writing.

The supplied range shows silver, pale blue and purple M1 finishes with matching rounded caps.

Product Information

 

Product dimensions and materials below are based on the current M1 reference panels. Anodized colors can shift with light and screen settings, and manual measurements are approximate. Retain an accepted physical sample to judge cap fit, body tone, nib performance and packing.

REFERENCE	SUPPLIED PRODUCT INFORMATION
Model shown	Hongdian M1 Submarine
Product type	Compact cartridge fountain pen with optional short converter solution
Colors shown	Silver, pale blue and purple
Complete weight	Approx. 21 g
Posted length	Approx. 130 mm; ordinary full-size pen reference shown as 138 mm
Grip reference	Middle grip dimension shown at approximately 10 mm
Grip length reference	Holding area shown at approximately 25 mm
Body material	Aluminum-alloy bar stock, CNC processed
Surface finish	Anodized coloring; no painted coating claimed
Nib and feed	Hongdian No. 26 self-developed nib with improved feed
Customization	Engraving support shown
Gift packaging	Case and included accessories require order confirmation

A Rounded Pocket Pen That Becomes Full Length

M1 shortens the barrel and cap without making the profile feel abrupt. Both ends are smoothly rounded, and the bright clip and cap ring provide a clean contrast against the satin metal body. The compact form fits a small pouch or notebook cover, then gains useful reach when the cap is posted for writing.

• Closed length reduces the space needed in a travel stationery kit.
• Rounded ends and the Submarine reference give M1 a friendly, recognizable outline.
• Approve the exact silver, blue or purple anodized tone from a physical sample.

A short steel-pen format combines pocket portability with the familiar structure of an open fountain pen.

Cap Clip Barrel Section Nib Feed and Filling Parts

 

The protective cap, clip, short barrel and writing section form a simple modular structure. Posting the cap over the back creates the stated 130 mm working length. At the front, the No. 26 nib sits over the improved feed. Behind the section, a compact cartridge or purpose-made short converter must fit within the restricted barrel space.

REFERENCE	SUPPLIED PRODUCT INFORMATION
Cap	Rounded metal cap with polished band and clip; check closure and posting fit.
Clip	Straight polished clip; inspect spring, alignment and attachment.
Barrel	Compact anodized aluminum-alloy body; inspect color, texture and dents.
Rear posting area	Accepts the cap to create the approximately 130 mm writing length.
Grip section	Short integrated section sized for the compact body; confirm comfort by sample.
Nib	Hongdian No. 26 self-developed nib; approve grade, alignment and line sample.
Feed	Improved ink-feed design presented for stable writing performance.
Cartridge route	Use only the cartridge specification confirmed by the supplier.
Short converter	Dedicated molded converter solution shown; inclusion must be confirmed.

The cap separates cleanly from the short body, revealing the nib, feed and compact front section.

CNC Aluminum and Anodized Color

CNC machining shapes the aluminum-alloy bar before anodized color is applied. There is no painted film described in the source, but the metal surface can still receive dents or scratches. Inspect the curved ends carefully, check the joint lines under reflected light and operate the cap and clip repeatedly to confirm clean assembly.

• Check the body for dents, machining marks, sharp edges and uneven anodized tone.
• Inspect the cap band and clip for scratches, looseness and poor alignment.
• Confirm that the cap closes securely and the section remains aligned.

The complete pen is shown at approximately 21 g, balancing metal construction with compact carry.

Posted Length and Number 26 Writing System

With the cap posted, M1 measures approximately 130 mm, only slightly shorter than the 138 mm standard-pen comparison shown in the product material. The middle of the grip is about 10 mm in diameter and its useful length is roughly 25 mm. These proportions let the small closed pen open into a familiar writing stance.

Posting the cap extends the compact M1 to an approximately 130 mm writing length.

Hongdian identifies a self-developed No. 26 nib and revised feed as the M1 writing system. Approval should look beyond a single attractive line: test first-stroke response after rest, continuous delivery through repeated text and the feel of the selected grade on the intended paper. Ink and writing angle can change the result.

• Test first-stroke start-up after the pen has rested capped.
• Check continuous flow through repeated horizontal and vertical strokes.
• Confirm nib alignment, feedback and line consistency with light pressure.

The No. 26 nib and improved feed are presented as the core M1 writing system.

Cartridge Setup Converter Filling and Routine Care

Use only the compact cartridge or short converter approved for M1. Before filling, check the section and barrel for debris and confirm that the converter will clear the inside of the short body. Work on a protected surface and never force a part that stops before seating.

USING A CARTRIDGE

• Push the compatible cartridge firmly into the section until the seal opens.
• Reassemble the pen and hold the nib downward briefly to begin ink flow.
• If needed, touch the nib lightly to clean paper; do not squeeze or force parts.

USING THE SHORT CONVERTER

• Fit the dedicated converter securely to the section.
• Place the nib and feed fully into fountain-pen ink.
• Draw ink slowly, wipe the section and confirm barrel clearance.

CLEANING AND STORAGE

• Flush the nib and feed with clean water before changing ink colors.
• Keep the cap closed between writing sessions to reduce nib drying.
• For long storage, clean and dry the pen; avoid impact and abrasive cleaners.

Pen Case Accessories and Personalization

If M1 is offered as a pen and case gift set, the case must be treated as a specified component rather than a generic promise. State body color, nib, cartridge supply, short converter, insert, instructions and outer box individually. The current images also show engraving as an option, which requires its own proof and production approval.

Approve personalized text or a logo first on a digital layout and then, when required, on an anodized sample. Marking contrast can differ between silver, blue and purple, so position, size and legibility should be assessed on the selected finish.

Personalized engraving is shown as an available option on the anodized M1 body.

Production and Quality Control

 

Lishui Lantian Pen Co., Ltd., founded in 1997, manufactures HONGDIAN products through metal preparation, CNC shaping, finishing, assembly, writing tests and packing. For M1, one control sample should establish the anodized shade, cap closure, posting retention, clip alignment, nib and feed result, compact filling components, engraving and presentation arrangement.

Manufacturer-supplied views: metal stock, component handling, production staging and workshop assembly.

view more

 

Material control: verify the approved aluminum-alloy construction and component list.

 

Finish control: compare anodized tone, texture, machining and polished trim.

 

Assembly control: inspect cap closure, posting fit, clip security and section alignment.

 

Writing and packing control: record the sample line and verify every listed component.

Before ordering the pen and case gift set, confirm the M1 color, nib sample, compact ink components, engraving proof and exact case contents. The accepted reference and signed purchase documents should govern production and shipment.

Hot Tags: short pens convenient carry pen and case gift set hongdian m1, China short pens convenient carry pen and case gift set hongdian m1 manufacturers, suppliers, factory, cartridge pen set, fine point pen set, signature pen set, vintage calligraphy pen set