Silver-golden Aluminum Luxury Gift Fountain Pen Hongdian A3

Zhejiang Lishui Lantian Pens Co., Ltd. is one of the leading manufacturers and suppliers of silver-golden aluminum luxury gift fountain pen hongdian a3 in China. If you're going to buy bulk CE approved silver-golden aluminum luxury gift fountain pen hongdian a3, welcome to get pricelist from our factory. All customized products are with high quality and competitive price.

A3 pairs a lightweight daily-writing body with a more formal presentation. Its lower center of gravity, ribbed grip and balanced capped form are intended for notes, signatures and longer sessions. The signed order should state nib grade, converter or cartridges, ink inclusion, case design and service terms.

A3 uses a dark aerospace setting to present its black body and two-tone writing point.

The references below follow the supplied A3 images. Weight is stated as approximate because it was measured manually. Lighting and normal production tolerance may slightly change the observed gloss and the transition between black and gold on the nib; use a signed physical pen as the approval standard.

A3 is presented as durable, writable and comfortable.

Aerospace Theme with a Restrained Black Finish

 

Contrast is the central design device. Deep black lacquer forms one continuous visual mass, interrupted only by narrow gold-colored rings and the elongated decorative clip. Because the pattern is limited to selected hardware, the pen maintains a formal silhouette rather than becoming visually crowded.
At 73 g and 16 mm across, 1831 is best understood as a substantial desk or gift pen. Buyers who normally use slim, low-weight instruments should test the diameter and balance before selecting it for extended daily writing.

Cap Clip Barrel Grip Nib Feed and Filling Parts

The polished clip sits on the protective cap, followed by the lightweight aluminum barrel. Dense horizontal grooves shape the holding area without relying on rubber or soft coating. The section carries the No. 26 nib and feed, and the rear accepts a rotary converter or compatible 3.4 mm cartridge.

Practical design considers grip, weight and filling route.

Anodized Aluminum and Durable Daily Construction

 

The product material specifies anodized color instead of paint. This treatment retains the metallic character of aluminum and avoids a peelable paint layer, though keys, tools and rough packing can still scratch the surface. Low total weight also places less load on clip and cap during ordinary carry.

• Inspect anodized parts from several angles for dents, scratches, rough machining and uneven tone.
• Compare barrel lines and grip grooves for consistent depth and clean edges.
• Operate the cap, section and filling connection and confirm straight clip alignment.
• Treat the black-and-gold nib boundary as a decorative transition with normal tolerance.
• Keep the glass ink bottle and other hard accessories separated from the pen inside the box.

Sample units from each carton under neutral light. Marks near the clip or along the grooves can remain hidden from a single viewing angle, so compare cap, barrel and section from more than one side.

A3 is shown during ordinary notebook writing.

Number 26 Black and Gold Steel Nib

The Luxury Gift Fountain Pen uses a No. 26 steel nib in EF or F. Close views show a revised two-tone treatment with a dark central face and gold-colored edges. It is intended for controlled daily writing rather than pronounced flex. Final width, wetness and feedback depend on grade, ink, paper, hand angle and pressure. EF is the practical choice for compact annotations and smaller handwriting, while F gives a more visible line for correspondence and signatures. Before a larger order, compare both grades with the intended paper and ink, because absorbent stock can make either line appear broader. A short writing test also confirms starting behavior, feed alignment and the level of feedback preferred by the user.

For approval, test the first stroke after capped rest, then write straight lines, curves and ordinary notes at normal and faster speeds. Check nib-feed alignment and make sure the point does not catch paper fibers. Retain the accepted writing sample with the production record.

Downward balance is intended to reduce hand pressure.

Cartridge Setup Converter Filling Cleaning and Storage

 

Use only fountain-pen ink and work above a protected surface. Confirm that converter or cartridge matches the A3 section before applying pressure. Stop and inspect alignment if the barrel, section or filling part does not engage smoothly.

USING A 3.4 MM CARTRIDGE

• Remove the barrel and press a compatible cartridge straight into the rear of the section until opened.
• Reassemble the pen, hold the nib downward and allow the feed to fill naturally.
• Start on scrap paper and do not shake the pen to speed ink flow.

USING THE ROTARY CONVERTER

• Seat the rotary converter firmly and submerge nib and feed beneath the ink surface.
• Turn the mechanism slowly, remove the pen and wipe the section with a soft cloth.
• Flush with cool clean water before a color change or extended storage.

Keep the cap closed between sessions. Avoid solvents, hot water, abrasives and sideways nib pressure; dry cleaned parts before reassembly.

one-stop solution

professional team

high quality

Pen Nib Filling System Ink and Gift Packing

The photographed Luxury Gift Fountain Pen presentation combines the black A3, a fitted case and a 70 ml ink bottle with a pen-rest cap. Because sellers may offer other configurations, the quotation must identify every included part instead of relying on the promotional image. The coordinated black palette gives the set a professional, unified appearance, while the pale fitted interior separates the pen from the bottle and makes each component easy to check on receipt. For corporate gifts, record the case finish, insert color, ink volume, nib grade and any card or marking requirement on the approved packing sheet.

For gift packing, confirm bottle sealing, insert fit, carton strength and separation between glass and metal. The pen must remain fixed and its nib protected. Barcode position, warning text and leaflet language should match the destination market.

Fitted gift-box presentation shown.

Production and Quality Control

 

Lishui Lantian Pen Co., Ltd. has manufactured HONGDIAN products since 1997. A3 production includes aluminum preparation, anodizing coordination, component inspection, assembly, nib tests and retail packing. A signed sample should control finish, nib grade, line result, filling fit and presentation arrangement. Inspection should also cover groove consistency, cap engagement, clip alignment and visible surface marks under normal viewing light. Packaging review confirms that the pen and ink bottle remain separated and secure during ordinary transport. These checks provide a clear reference for repeat orders without treating normal minor production tolerance as a defect.

Packing check reconciles all listed components and isolates the pen from hard objects.Manufacturer-supplied workshop views show material handling, production activity, assembly and quality-control environments.

view more

 

Material check verifies aluminum parts, steel nibs, converters, cartridges and packaging.

 

Surface check compares anodized tone, machining lines, grip grooves, clip and trim.

 

Assembly check covers cap engagement, section threads, nib-feed position and filling fit.

 

Writing check records start-up, sustained flow and the accepted EF or F line.

Hot Tags: silver-golden aluminum luxury gift fountain pen hongdian a3, China silver-golden aluminum luxury gift fountain pen hongdian a3 manufacturers, suppliers, factory, Cartridge Converter Fountain Pen, Collector Fountain Pen, Full Stainless Steel Ink Pens HONGDIAN 516, Long Barrel Fountain Pen, Precision Fountain Pen, thin metal pen